Titan Air's Direct-Fired product line has been manufactured since 1983 and has maintained leadership in the industry through research and development of new products and further improvement to basic products. In additional to the 100% outside air function, recirculation, variable air volume, and high outlet temperature options are available. Cooling and energy recovery can also be added to fit your application requirements.
Maximum 120F temp rise for NG and LP.
- TA Series Description
- TA Unit & Accessories
- TA Vertical Unit & Accessories
- TA Weights
- TA Standard Temperature Controls
Demand Air | Variable Air Volume
Titan Air's Demand Air unit is a variable air volume unit. Supply air volume is adjusted by a VFD (variable frequency drive) which allows each unit to respond to changing exhaust loads. Many applications control building pressure as exhaust varies. Electrical power consumption drops on a cubed ratio to blower speed and gas consumption also drops, reducing operational costs.
Maximum 100F temp rise for NG and LP.
- TA Series Description
- TA Unit & Accessories
- TA Vertical Unit & Accessories
- TA Weights
- TA Demand Air General Information
- TA Demand Air Example
- TA Standard Temperature Controls
AR Systems | Recirculation
Titan Air's AR system is designed to substantially reduce infiltration of cold air (which accounts for up to 40% of a building's heat loss) and reduce energy requirements considerably. The pressurized heating system creates a slight and even overall pressure that effectively controls infiltration of cold air. The AR system is capable of supplying 100% fresh outside air, or a mixture of fresh and return air. When not in maximum ventilation mode, the system will recirculate building air to reduce energy requirements. Return air does not pass across the direct-fired burner. AR system advantages include high heat efficiency, lower energy use, and greater overall comfort. The AR system when sized properly with building relief helps clean out airborne contaminants and increases indoor air quality.
Maximum 110F temp rise on NG and 90F on LP.
- TA Series Description
- TA AR Unit & Accessories
- TA AR Vertical Unit & Accessories
- TA AR Building Pressurization
- TA AR Pool Example
- TA Standard Temperature Controls
TAP Units
TAP units were designed as indoor units to provide an economical and modular solution for small to medium sized paint booth ventilation and curing operations. These units are versatile enough for other applications. Modular construction makes one burner section suitable for multiple equipment configurations. Indoor vertical units can have the outside air ductwork connected to a choice of three sides of the bottom of the unit. Motor and bearings are outside the airstream allowing a higher discharge temperature and cure temps up to
200 degrees F.
Maximum 120F temp rise on NG and 109F on LP.
- TAP General Information
HOT Units | High Outlet Temperature
Titan Air's ETL listed high outlet temperature 2-speed make-up air system provides heating temperatures in two distinct ranges for superior painting and curing. Cooling and humidity control can also be added for temperature and humidity controlled applications.
Maximum 120F temp rise in spray mode. Unlisted maximum 160F in bake mode.
- HOT Information
TAM Units
Titan Air's TAM units are the solutions for competitively priced and/or short lead time projects. TAM units offer many of the same features of our TA line with the advantage of a compact size, light weight construction, and versatile mounting options.
Maximum 120F temp rise on NG and LP.
- TAM Unit & Accessories
Arrangements
Below are standard arrangements. Additional custom arrangements are available upon request.
|
