Titan Air's packaged DX units are designed using a conservative application of coil and blower manufacturers design recommendations to meet a customer's specific requirements. You can be assured of proper heating / cooling and airflow without paying for an undersized or oversized "standard" units. Multiple heating and humidity control options are available to suit jobsite gas, water, or power supplies. Standard temperature control options include discharge or room DDC control with optional building management interfaces or PLC controls for industrial or process applications.

All heating and cooling components are factory wired, piped, and tested to make your jobsite installation as easy as possible. Multiple configurations and layouts are available for space or height restrictions. Custom condensing units are available for specific performance or construction requirements. Digital scroll compressors, modulating hot gas re-heat, and low acoustic options are available.

The Titan Air packaged direct-fired and DX cooling unit combines the high efficiency of direct-fired heat with the convenience of packaged DX cooling. Direct-fired heat is 92% efficient and lower cost than indirect-fired heat. Standard equipment is available up to 14,000 CFM and 60 tons.
Contact the factory for larger custom equipment.

A) Outside Air Intake / Mixing Box

Options include 45 degree intake hood, hood filter combo, mushroom hood, wind driven rain louvers, and mixing boxes with flat or angled filters.

G) High Efficiency Heating

Optional direct-fired burner is 92% efficient with a 25:1 turn down and is a lower cost that indirect-fired heat. Additional heating options include indirect-fired, electric, hot water, and steam.

B) High Quality & Performance Controls

Flexible control sequences to meet customer requirements including DDC or PLC controls. Additional options include air flow monitoring station, and building management integration.

H) Commercial or Industrial Construction

Multiple casing construction materials and components are available to meet the application requirements. Options include 2" double wall limited through metal construction and corrosion resistant construction.

C) Supply Fan / Power Return Fan

Multiple optional fan configurations are available with additional options including air flow monitoring and vibration isolation.

J) High Efficiency Final Filter Section

Multiple filter combinations are available to achieve the customer indoor air quality requirements. Options include HEPA and carbon filters.

D) Factory Packaged Refrigeration

Our high skilled employees take care of all wiring, piping, and refrigeration making the installation as simple and hassle free as possible.

K) Custom Air Cooled Condensing Unit

Offers flexibility of condenser performance and controls. Additional options include modulating hot gas re-heat, low ambient operation, upgraded refrigeration components and special circuiting.

E) Dehumidification

Optional modulating hot gas re-heat provides accurate and efficient method for controlling humidity using the excess heat from the refrigeration process. Additional options include electric, hot water or steam coils and indirect fired heat.

L) Compressor Control

Digital scroll compressors are available for greater cooling control and energy efficiency. Additional options include hot gas bypass for commercial applications.

F) Humidification

Optional gas or electric steam generators can be added for humidification. Additional options include direct evaporative cooling.

M) Low Ambient Operation

Standard industrial equipment can operate to 20 degrees F by condenser fan cycling. Additional options include variable air volume or flood control.

Standard Features

Construction

   • ETL Listed
   • Primed welded structural steel base       
   • G-90 Galvanized Casing
   • Single wall access doors
   • Internally mounted motor, burner, and controls
   • Pre-piped, pre-wired, and factory tested
      • Sectioned units may require field assembly,          wiring, and piping
      • All ACCU unit piping, wiring, and charging
         by manufacturer
   • Lifting provisions
   • Multiple configurations

Fan & Motor

   • DWDI forward curve industrial type blower(s)
   • Solid turned ground and polished shaft
   • Self aligning bearings
   • Premium E ODP blower motor w/ 1.15
      service factor
   • Motor starter & overload protection
   • Adjustable motor base
   • Variable pitch drive up to 30 HP

DX Coil

   • DX coils rated in accordance with ARI       standard 410
   • G-90 galvanized casing
   • Aluminum fins
   • Copper tubes
   • Copper headers

ACCU (Air Cooled Condensing Unit)

    • ETL Listed
    • Hermetic scroll compressor with service valves,        crankcase heater, and rubber mounting pads
    • NEMA 3R panel with UL 508A listing
    • Integrated packaged casing matching unit       construction
    • Condenser coil with G-90 galvanized frame,        aluminum fins, and copper tubes
    • Condenser fans with ODP motors and grill        guards
    • Liquid line solenoid, filter dryer, and site glass
    • Self contained refrigerant circuits

Controls

          • Non-Fused door interlocked disconnect switch
          • Discharge air temperature control, with remote
             set-point & summer-off-winter selector switch
          • Auxiliary contacts for exhaust fan interlock
          • Control voltage transformer