Titan Air offers their Direct Evaporative Cooling product line as shipped loose accessories or built into an air handler. Either of these options are available for commercial, industrial, or custom applications. If you have specific dimensions required because of jobsite space or clearance requirements we can build custom sizes to meet your requirements. Evaporative coolers come with high quality construction and components. We also design our equipment with energy efficiency and serviceability as a main focus.

Evaporative Cooling Effectiveness

The performance of an evaporative cooler is based on the ratio of the number of degrees it can cool the air compared to the Wet Bulb Depression (dry bulb temp minus wet bulb temp). This rating is the "Evaporative Effectiveness" or "Evaporative Efficiency" of the cooler.

In the continental United States, the average wet bulb temperature on hot summer days ranges between 70 degrees F and 80 degrees F. Evaporative cooling media pads can cool outside air to within a few degrees of the wet bulb temperature.

Standard Features

Construction

   • ETL Listed
   • Formed G-90 Galvanized base
      < 10,000 CFM
   • Primed welded structural steel base       
      > 10,000 CFM
   • G-90 Galvanized Casing
   • Single wall access doors
   • Internally mounted motor, burner, and controls
   • Pre-piped, pre-wired, and factory tested
      • Sectioned units may require field assembly,          wiring, and piping
   • Lifting provisions
   • Multiple configurations

Fan & Motor

   • DWDI forward curve industrial type blower(s)
   • Solid turned ground and polished shaft
   • Self aligning bearings
   • Premium E ODP blower motor Mw/ 1.15
      service factor
   • Motor starter & overload protection
   • Adjustable motor base
   • Variable pitch drive up to 30 HP

Evaporative Medial

   • Rigid cellulose media
   • Service vestibule housing contains the       submersible pump, float valve, bleed line,
      fill / drain / overflow ports, gauges, and
      flow control valve
   • Stainless steel sump 
   • Properly designed distribution header,
      media supports, and nominal 500 fpm face       velocity to prevent moisture carryover

Controls

          • Non-Fused door interlocked disconnect switch
          • Discharge air temperature control, with remote
             set-point & summer-off-winter selector switch
          • Auxiliary contacts for exhaust fan interlock
          • Control voltage transformer

Our extensive standard product lines can meet most application requirements, but if you have a unique application or requirement, our product lines can be customized to fit your needs. Titan Air's custom equipment offers flexible performance, construction, components, and controls to meet your specifications and special requirements.

Contact one of our sales engineers and we will work with you to custom design our equipment to fit your exact requirements.

sales@titan-air.com or 715-597-2050

Titan Air is continuously improving their product lines, therefore all dimensions are subject to change without notice. Contact the factory for construction purpose drawings.